I don't get why people like jujutsu. I tried it for a while but I work with a quite a few people in the same repo and I need easy named branches that keep up with commits. For all the many problems in git, branches are dead easy. That was the big innovation over svn at the time.
Last time I tried jj, branches were an extremely laborious process to keep up to date. I don't see how people that aren't working alone can work with that. I have numerous branches in flight at any given time, and my colleagues do as well. The idea of manually keeping them pointed at the right commit is just nuts.
Maybe they've fixed that astonishing choice since then, and I'd give things another go if they did. But branches and worktrees are how I operate.
Regarding the article, I have no idea what is going on as I'm red-green color deficient.
I assume you mean named branches (bookmarks in jj)? Because anonymous branches in jj are trivial: you just `jj new <parent_change_id>` and you have a new branch.
Bookmarks aren’t that bad either IMO, especially with the recent addition of `jj bookmark advance`. Curious if you can say more about the particular difficulties you found keeping them up to date?
Yes, that describes me at both jobs I’ve had since learning jj. Hence why I asked for specifics: I’m genuinely curious what other people struggle with, partially because I’d like to help them if I can, and partially because it gives me a better understanding of common pitfalls which helps when teaching other people.
I believe this is the most common scenario, yes. If you're used to actively pushing and pulling from the same branche as your colleagues, you need to learn how to manipulate diverging changes and conflicting bookmarks, but other than that all the jj magic is limited to your local activity.
I use jj all the time for pull requests, in fact I don't use regular git at all anymore, and it's perfectly easy. Not only can I easily keep all my pull requests properly synced to their base branches, but I can easily and very quickly address review comments, keeping the commit stack clean without having to manually squash or amend or anything of that sort. Honestly it's a lot easier and more efficient than git for me because of how much naturally follows rather than requiring explicit imperative fixups.
tbh i never actually learned git, but peope working on the same repos with git seem to be ahme ones struggling with named branches... i just do jj rebase and it just works idk
I’ll be honest, as a long-time jj user, I actually haven’t the foggiest what you’re talking about with branches being laborious to keep up to date. Can you elaborate?
I don't try to reimplement the git workflow on top of Jujutsu. I like it because I can let go of a bunch of annoying noise that I needed in Git. I like it because rebases don't have to be synchronous and modal. I like it because I can easily edit history, rearrange the commit graph, change commit descriptions, duplicate, and so much more, and even remotely (without having to checkout first). There's so much to love that I never could've even dreamed of under Git.
> `absorb` assigns the changes based on whichever previous commit most recently touched those files, which sometimes doesn't actually correspond to which commit should own these particular changes.
I’m pretty sure `jj absorb` (and its predecessors, `git-absorb` [0] and `hg absorb`) are smarter than this, instead looking at the actual diffs.
Ah yeah, you're right, that's a misrepresentation on my part - it's based on lines, not the file:
> [absorb] splits changes in the source revision and moves each change to the closest mutable ancestor where the corresponding lines were modified last. If the destination revision cannot be determined unambiguously, the change will be left in the source revision.
I use absorb fairly often, fwiw. It's great for when I want to make a patch to a commit that will easily absorb into its right place. And I also, sometimes, prefer the more intentional approach where I decide exactly where each hunk will go.
This seems like a lot more effort than the (to me) more natural jj workflow of maintaining the idealized series of commits plus a working commit on top. As you make tweaks and fixes you just squash the relevant parts into the already-clean history.
Basically, if you don’t get into that sort of situation with commits containing parts they shouldn’t in the first place, you don’t need to do any extra work to clean them up. The tip of your branch should be the only “messy” part.
That is a lot of discipline up front. I am sure there are problems which are nicely bucketed, but I usually have to go with the flow and make changes as I see them. I want to keep working with the code, not babysitting version control as I focus on getting the initial version to work.
This remind me of [jj megamerge](https://isaaccorbrey.com/notes/jujutsu-megamerges-for-fun-an...). jj allows concentrating on developing while leaving things for vcs alone, as well as solving vcs things (conflicts) at very beginning (megamerge). Really good.
As a git rebase enjoyer, I've completely switched over to jujutsu. The whole experience is more ergonomic in my opinion, and the default workflow which I use (using `jj new` to create a new change that clearly delineates work on a different "thing" before I start working on it) fits my mental model much better than the traditional write-then-commit workflow we all grew up with.
The only thing that stops me from switching to jujutsu is that lazygit already paves through all these paper cuts pretty well, and I'd miss their custom patches feature.
You can literally jump into a commit and edit its contents directly, and everything is auto-rebased on top.
There are no modal “sorry rebase failed, best of luck” gotchas. There are no “oops I put the wrong thing in the wrong part of the rebase and now I have to abort and start all over” gotchas.
It’s rebase, but without all the extra work, mental overhead, failure cases, and effort.
As someone who doesn't know jj and read this article, it does sound like `git rebase -i` to me. I'm sure that if I actually spent time learning jj I'd know the difference though.
Or let an agent deal with any git nonsense. Yes I’m already aware some smart alec will lie about the time an agent totally deleted their entire repo and branch.
This is my take on it too. And I built BetterGit (https://www.satishmaha.com/BetterGit/) before agent capabilities became widespread. A lot of things in Git and existing GUIs are just cumbersome, and my app makes it better to handle the most common tasks and makes them easier. It's really meant for newcomers to Git.
BUT! You can simply ask an agent to commit every meaningful block of work. Or just ask any agent to create a JIRA ticket and start work on that named branch. Or ask it to create work trees and create a PR. Life has gotten much easier without having to fight the command line or confusing GUI UX.
I have been walking some newer programmers through Git recently, so this topic is fresh on my mind. The commands in the blog post do not look friendlier or even different.
I spoke about this before, but jj has the Blub Paradox problem, from the pg's essay Beating the Averages (https://paulgraham.com/avg.html).
Yes, you can do most commit manipulations with git just like with jj. But, users of jj know they're "looking down the power continuum" (to reuse pg's terminology) when they look at git, whereas git users cannot fathom what's exactly the deal with jj. Unfortunately, the only way to get it is to spend a week with it, with an open mind. It's close to impossible to describe it except "it's really neat" and "wow it removes all git's friction I didn't know existed".
And, apparently, there's a pattern of having to try at least two times before it becomes intuitive!
The problem with this mindset, that there is zero reason to move away from Git. I can do effortlessly everything with it. There is no incentive. I never said "it would be so good that I would be able to X"... and I didn't find a solution for it quickly. As under this post is obvious as much as under other previous posts, you can do the same things effortlessly with Git. The effort is not that I need to use 2 commands less, but to separate the code (in this specific case), which takes about a 100-1000x more time than typing those 2 extra commands, or really the need to think what kind of commands need to be used in any VCS.
The same problem with vi for example. Which I learned, deeply and for a long time. Maybe I will be break even in a decade or two. And for example, I can code faster than anybody who I know and use vi all the time (or some vi keyset in Emacs or something), not because I type faster, but because I don't need to rewrite my code that many times than them.
The same with jj. I'm happy that it clicks better than Git for some. But I know Git from inside and out. Git was never the bottleneck for me. And really any VCS in the past. If I learn jj, then I don't expect that the effort pays off in a decade or less in the best case. My work's result would be the exact same thing, just with different commands, commands which takes almost no time compared to my other tasks.
> Unfortunately, the only way to get it is to spend a week with it, with an open mind
We do get it. But have you ever thought that git inflexible nature and full control is what some people people like?
Having three different state for your work (working tree, staging, and committed) is nice for reviewing code. Picking lines and chunk give me an additional mental state to think about the design of the code.
And once upon a time, I preferred history log like the one in the article. But this days (mostly inspired by mailing list development style) I wants the commit in my main log to be either features or bug fixes. Everything else is “wip”, which I will squash. It makes it easier when rewriting history, cherry picking, or just browsing the log.
The big differences are that the jj approach gives you a commit message for the staging change, and lets you jump to some other commit without extra steps.
jj has nothing I need, so it would be changes for the sake of changes. I’m not saying it’s bad, but people do need to realize that their struggles are there, not the whole world.
Totally fair :) personally I used to be a git wizard and I am relieved at how much about it I’ve been able to forget since learning jj, but I understand not everyone has the same experience.
> For large features, I find this workflow far easier than having to maintain strict git rigour for the lifecycle of the feature's development.
I don't know about all that. All sorts of ex-post-facto automated cut-up-and-splice commits sounds to me like a recipe for an every larger mess. I say maintain git rigor, always. Now, you could say "You only say that because you know git rather than jujutsu" or "if you use git absorb more you'll get it", and theoretically you might be right, but... meh, I kind of doubt it.
The elephant in the room is that I haven't had to do something complicated and manual in git by hand in a long while. I'm using AI to generate code, and further, having it commit to git and pushing and pulling and managing branches and merging for me. So for people new to software development, they can also just ask AI to deal with git, which papers over the harder parts of its UX.
I don't get why people like jujutsu. I tried it for a while but I work with a quite a few people in the same repo and I need easy named branches that keep up with commits. For all the many problems in git, branches are dead easy. That was the big innovation over svn at the time.
Last time I tried jj, branches were an extremely laborious process to keep up to date. I don't see how people that aren't working alone can work with that. I have numerous branches in flight at any given time, and my colleagues do as well. The idea of manually keeping them pointed at the right commit is just nuts.
Maybe they've fixed that astonishing choice since then, and I'd give things another go if they did. But branches and worktrees are how I operate.
Regarding the article, I have no idea what is going on as I'm red-green color deficient.
I assume you mean named branches (bookmarks in jj)? Because anonymous branches in jj are trivial: you just `jj new <parent_change_id>` and you have a new branch.
Bookmarks aren’t that bad either IMO, especially with the recent addition of `jj bookmark advance`. Curious if you can say more about the particular difficulties you found keeping them up to date?
Imagine that you use jj, while everyone else who works on the repo along with you uses regular git.
Is it easy?
Yes, that describes me at both jobs I’ve had since learning jj. Hence why I asked for specifics: I’m genuinely curious what other people struggle with, partially because I’d like to help them if I can, and partially because it gives me a better understanding of common pitfalls which helps when teaching other people.
Yes, that is the case for almost every repo I’ve ever used jj for. It is a complete non-issue. There is virtually zero friction.
yeah nobody "has to know", especially if everyone else is also rebasing etc constantly.
I believe this is the most common scenario, yes. If you're used to actively pushing and pulling from the same branche as your colleagues, you need to learn how to manipulate diverging changes and conflicting bookmarks, but other than that all the jj magic is limited to your local activity.
I use jj all the time for pull requests, in fact I don't use regular git at all anymore, and it's perfectly easy. Not only can I easily keep all my pull requests properly synced to their base branches, but I can easily and very quickly address review comments, keeping the commit stack clean without having to manually squash or amend or anything of that sort. Honestly it's a lot easier and more efficient than git for me because of how much naturally follows rather than requiring explicit imperative fixups.
tbh i never actually learned git, but peope working on the same repos with git seem to be ahme ones struggling with named branches... i just do jj rebase and it just works idk
I’ll be honest, as a long-time jj user, I actually haven’t the foggiest what you’re talking about with branches being laborious to keep up to date. Can you elaborate?
I don't try to reimplement the git workflow on top of Jujutsu. I like it because I can let go of a bunch of annoying noise that I needed in Git. I like it because rebases don't have to be synchronous and modal. I like it because I can easily edit history, rearrange the commit graph, change commit descriptions, duplicate, and so much more, and even remotely (without having to checkout first). There's so much to love that I never could've even dreamed of under Git.
I like Jujutsu so much that I've been working on massive refactors to my tooling in order to support it (example: https://github.com/LoganDark/get-shit-done)
> `absorb` assigns the changes based on whichever previous commit most recently touched those files, which sometimes doesn't actually correspond to which commit should own these particular changes.
I’m pretty sure `jj absorb` (and its predecessors, `git-absorb` [0] and `hg absorb`) are smarter than this, instead looking at the actual diffs.
[0]: https://github.com/tummychow/git-absorb
Ah yeah, you're right, that's a misrepresentation on my part - it's based on lines, not the file:
> [absorb] splits changes in the source revision and moves each change to the closest mutable ancestor where the corresponding lines were modified last. If the destination revision cannot be determined unambiguously, the change will be left in the source revision.
I use absorb fairly often, fwiw. It's great for when I want to make a patch to a commit that will easily absorb into its right place. And I also, sometimes, prefer the more intentional approach where I decide exactly where each hunk will go.
Also `sl absorb`.
This seems like a lot more effort than the (to me) more natural jj workflow of maintaining the idealized series of commits plus a working commit on top. As you make tweaks and fixes you just squash the relevant parts into the already-clean history.
Basically, if you don’t get into that sort of situation with commits containing parts they shouldn’t in the first place, you don’t need to do any extra work to clean them up. The tip of your branch should be the only “messy” part.
That is a lot of discipline up front. I am sure there are problems which are nicely bucketed, but I usually have to go with the flow and make changes as I see them. I want to keep working with the code, not babysitting version control as I focus on getting the initial version to work.
This remind me of [jj megamerge](https://isaaccorbrey.com/notes/jujutsu-megamerges-for-fun-an...). jj allows concentrating on developing while leaving things for vcs alone, as well as solving vcs things (conflicts) at very beginning (megamerge). Really good.
As a git rebase enjoyer, I've completely switched over to jujutsu. The whole experience is more ergonomic in my opinion, and the default workflow which I use (using `jj new` to create a new change that clearly delineates work on a different "thing" before I start working on it) fits my mental model much better than the traditional write-then-commit workflow we all grew up with.
I have finally embraced squashing PRs and realized I wasted my youth trying to write Good Commits.
The only thing that stops me from switching to jujutsu is that lazygit already paves through all these paper cuts pretty well, and I'd miss their custom patches feature.
I see there's a similar project for JJ, but it doesn't seem nearly as polished https://github.com/Cretezy/lazyjj
Jjui is the best tui for jj
What does jjui have on lazyjj? Sincere question; I tried it, and I want to get it, and so far I don’t.
With jj I mostly just `jj split -B @`. Nice interactive ui for picking the changes I want into a commit. So many times better than 'git add -p'
I'm not an expert in Magit by any means, but I bet there's a way to accomplish this in only a few keystrokes.
So... git rebase -i?
No, more like:
The main difference to jj is that the RED commit is created later with git.But isn't the flow nearly identical with jj, because the key part, the moving of hunks, is interactive (aka manual) anyway?
Definitely not. Switch to a previous commit, make edits, changes propagate into the future commits (including into a git repo if you wish [1])
Jj is not git and is not a git tool, it just (thankfully) uses git as a backend, so you can still carry on with the rest of the world.
[1] https://news.ycombinator.com/item?id=47765759
> Switch to a previous commit, make edits, changes propagate into the future commits
In what way is that different from using `git rebase -i` to edit a commit?
You can literally jump into a commit and edit its contents directly, and everything is auto-rebased on top.
There are no modal “sorry rebase failed, best of luck” gotchas. There are no “oops I put the wrong thing in the wrong part of the rebase and now I have to abort and start all over” gotchas.
It’s rebase, but without all the extra work, mental overhead, failure cases, and effort.
I'd recommend reading the post, it's not that long
As someone who doesn't know jj and read this article, it does sound like `git rebase -i` to me. I'm sure that if I actually spent time learning jj I'd know the difference though.
git rebase -i kinda sucks once you tried jj.
Or let an agent deal with any git nonsense. Yes I’m already aware some smart alec will lie about the time an agent totally deleted their entire repo and branch.
This is my take on it too. And I built BetterGit (https://www.satishmaha.com/BetterGit/) before agent capabilities became widespread. A lot of things in Git and existing GUIs are just cumbersome, and my app makes it better to handle the most common tasks and makes them easier. It's really meant for newcomers to Git.
BUT! You can simply ask an agent to commit every meaningful block of work. Or just ask any agent to create a JIRA ticket and start work on that named branch. Or ask it to create work trees and create a PR. Life has gotten much easier without having to fight the command line or confusing GUI UX.
JJ is a whole different way to think about source control. The fact that you don’t need to run an agent just to use it is a nice bonus.
You can also have you agent use jj with this skill
https://github.com/danverbraganza/jujutsu-skill
I have been walking some newer programmers through Git recently, so this topic is fresh on my mind. The commands in the blog post do not look friendlier or even different.
So: Squash everything together then pick each component out by squash -i to an empty commit.
Seems straightforward, wouldn’t call it special
I think jj will never gain momentum because people only have a git mental model at this point, so won't be able to effectively reason about jj.
I spoke about this before, but jj has the Blub Paradox problem, from the pg's essay Beating the Averages (https://paulgraham.com/avg.html).
Yes, you can do most commit manipulations with git just like with jj. But, users of jj know they're "looking down the power continuum" (to reuse pg's terminology) when they look at git, whereas git users cannot fathom what's exactly the deal with jj. Unfortunately, the only way to get it is to spend a week with it, with an open mind. It's close to impossible to describe it except "it's really neat" and "wow it removes all git's friction I didn't know existed".
And, apparently, there's a pattern of having to try at least two times before it becomes intuitive!
The problem with this mindset, that there is zero reason to move away from Git. I can do effortlessly everything with it. There is no incentive. I never said "it would be so good that I would be able to X"... and I didn't find a solution for it quickly. As under this post is obvious as much as under other previous posts, you can do the same things effortlessly with Git. The effort is not that I need to use 2 commands less, but to separate the code (in this specific case), which takes about a 100-1000x more time than typing those 2 extra commands, or really the need to think what kind of commands need to be used in any VCS.
The same problem with vi for example. Which I learned, deeply and for a long time. Maybe I will be break even in a decade or two. And for example, I can code faster than anybody who I know and use vi all the time (or some vi keyset in Emacs or something), not because I type faster, but because I don't need to rewrite my code that many times than them.
The same with jj. I'm happy that it clicks better than Git for some. But I know Git from inside and out. Git was never the bottleneck for me. And really any VCS in the past. If I learn jj, then I don't expect that the effort pays off in a decade or less in the best case. My work's result would be the exact same thing, just with different commands, commands which takes almost no time compared to my other tasks.
> Unfortunately, the only way to get it is to spend a week with it, with an open mind
We do get it. But have you ever thought that git inflexible nature and full control is what some people people like?
Having three different state for your work (working tree, staging, and committed) is nice for reviewing code. Picking lines and chunk give me an additional mental state to think about the design of the code.
And once upon a time, I preferred history log like the one in the article. But this days (mostly inspired by mailing list development style) I wants the commit in my main log to be either features or bug fixes. Everything else is “wip”, which I will squash. It makes it easier when rewriting history, cherry picking, or just browsing the log.
There’s nothing stopping you from using separate changes to emulate the staging area if you want.
That is, in essence, the "squash workflow": https://steveklabnik.github.io/jujutsu-tutorial/real-world-w...
The big differences are that the jj approach gives you a commit message for the staging change, and lets you jump to some other commit without extra steps.
I can, but I don’t need to.
jj has nothing I need, so it would be changes for the sake of changes. I’m not saying it’s bad, but people do need to realize that their struggles are there, not the whole world.
Totally fair :) personally I used to be a git wizard and I am relieved at how much about it I’ve been able to forget since learning jj, but I understand not everyone has the same experience.
> For large features, I find this workflow far easier than having to maintain strict git rigour for the lifecycle of the feature's development.
I don't know about all that. All sorts of ex-post-facto automated cut-up-and-splice commits sounds to me like a recipe for an every larger mess. I say maintain git rigor, always. Now, you could say "You only say that because you know git rather than jujutsu" or "if you use git absorb more you'll get it", and theoretically you might be right, but... meh, I kind of doubt it.
The elephant in the room is that I haven't had to do something complicated and manual in git by hand in a long while. I'm using AI to generate code, and further, having it commit to git and pushing and pulling and managing branches and merging for me. So for people new to software development, they can also just ask AI to deal with git, which papers over the harder parts of its UX.