They are doing this also for the science version, the 15C.
I bought a 15C in the 1980s, and have enjoyed it ever since. It is like a rock. Despite being treated roughly over the years, nothing is wrong with it apart from some dents in the metal parts and my name, scratched on the back. I suppose I've replaced the batteries a couple of times, but that's it. This thing just refuses to die.
The main thing is that the keys still work like on day 1. And I've never seen a calculator with keys like this, with such feedback that you never need to worry about double-presses or missed-presses.
I just love the thing. If it died, I'd buy one of these new versions in a flash. But I think it will outlast me!
I'm a lifelong fan of HP calculators. I have a 15c in front of me right now that I've had since the mid-ish 80s. Still works perfectly.
But the 15c 'Collector's Edition' had some issues, and I wonder about the build quality and reliability of this new one, too. Plus: my guess is you can get an original working 16c on eBay for less than this is going to cost.
I used a 33C in HS and college. Finally in med school during my diversion into the lab, something happened to the little bubble display. And had to upgrade to an 11C.
The beauty of an RPN calculator was that nobody asked to borrow it.
I would get one of these in a hot minute except that my HP-16C that I got sometime in the '80's is still going strong! I rarely use it anymore but a couple of years back I was working on an app that involved bit-twiddling and the 16C fired right up and was immediately helpful.
I have an original HP11C within reach. Still works. Had to replace the batteries this year, after 20 years.
If you replace the batteries, get the good Panasonic silver cells from Newark, not "compatible" alkaline cells. The silver cells were intact after two decades.
I have one of the originals. It's useful if you do low-level programming a lot, and in a pinch you can also use it as a standard calculator. The biggest limitation is that the screen can only show 8 digits. In binary mode, this can be awkward if you're working with variables that are more than 8 bits. The calculator has functionality for scrolling around the number that's being displayed to try to work around this, but it's still annoying compared to newer calculator designs that can show more digits at once.
If this uses similar parts as the HP-15C Collector’s Edition in 2023 (which seems likely), then be advised that it doesn’t match the quality of the original in terms of display, key feel, and key labeling (colors). The back side of the 15C CE is also pretty ugly in my opinion [0] compared to the original [1].
The originals (I still have my 1987 HP-15C) used silicon-on-sapphire technology, normally used for space, that ensured the amazing battery life. The keyboard domes had a complicated fabrication process to ensure optimum feel. The keycaps were double shot for durability. No modern calculator is going to be made to that standard, it would cost at least $1000.
I did never use a 16C, but I have a 42 at home and use it very often. It goes so far, that I also have the 42 app on my phone as a replacement for the default calculator app. I am using RPN, and I think I'm the only one in my age category that does (at least none of my friends who studied ever heard of RPN) - it's such a superior way to calculate. I usually have problems to work with a "regular" calculator due to being used to it "4, enter, 5, times" instead of "4 times 5".
If this would be a 42, I would definetely buy it. My 42 is a gift from my father and time did not only good to it.
/edit switched UPN to RPN, as I got the translation wrong
You might want to consider iHP48 app, it is my goto phone/tablet calculator running a 48 ROM. My goto desk calculator is the DM42, though I occasionally use my 50g for units or on the iHP48 app instead.
I believe it is the only official HP licensee for calculators and some former HP calculator employees work with them. This is as close as a legacy HP calculator comes today.
I think HP sold their calculator business to this company. I bought the iOS version of the 15C emulator directly from HP many years ago, but the app store changed it to this company.
HP generously gave me a 16C at the end of an internship. It was a weird beast! Amazing a simulating different types of integer arithmetic. Not at all a replacement for the 11C, 12C, or 15C.
Ugh same. I had a 49g and a 49g+ in high school. The 49g broke down and the other got robbed when my student room got burgled a couple years later.
Learned a lot of RPN programming on those things!
I saw one in the wild a couple months back but had to say it didn't live up to my memories. Super slow and clunky interfaces compared to our modern touch screens.
I still have my 16C, and it still works perfectly. I got it in a swap for a 15C and 11C, so I got the reissue 15C when it came out, and it's not up to the quality of the original.
if that's true, it seems really wasteful honestly. why not reimplement the functionality using a native instruction set rather then emulating some other processor?
That seems extremely efficient to me. That'd be a bad way to build a brand new calculator, perhaps, but the quickest way to get an existing, what, 40 year old?, firmware up and running with the least number of gotchas.
I doubt there are competent and cost-effective engineering teams in existence who could exactly match HP's numeric libraries in a $150 calculator that's guaranteed to sell a tiny number of units.
They are doing this also for the science version, the 15C.
I bought a 15C in the 1980s, and have enjoyed it ever since. It is like a rock. Despite being treated roughly over the years, nothing is wrong with it apart from some dents in the metal parts and my name, scratched on the back. I suppose I've replaced the batteries a couple of times, but that's it. This thing just refuses to die.
The main thing is that the keys still work like on day 1. And I've never seen a calculator with keys like this, with such feedback that you never need to worry about double-presses or missed-presses.
I just love the thing. If it died, I'd buy one of these new versions in a flash. But I think it will outlast me!
I'm a lifelong fan of HP calculators. I have a 15c in front of me right now that I've had since the mid-ish 80s. Still works perfectly.
But the 15c 'Collector's Edition' had some issues, and I wonder about the build quality and reliability of this new one, too. Plus: my guess is you can get an original working 16c on eBay for less than this is going to cost.
Honestly, it pains me to say it but I'd recommend a SwissMicros DM16L instead: https://www.swissmicros.com/product/dm16l
Why would that pain you to say it? (Honest question, not leading.)
Because I'm such a longtime fan of HP models.
Fair enough!
I have a 50g that I haven't used extensively, and a DM42n here on my desk at work (which I still don't use extensively, but aspire to).
I got mine from my father for high school graduation. It is one of my most prized personal posessions.
I used a 33C in HS and college. Finally in med school during my diversion into the lab, something happened to the little bubble display. And had to upgrade to an 11C.
The beauty of an RPN calculator was that nobody asked to borrow it.
I would get one of these in a hot minute except that my HP-16C that I got sometime in the '80's is still going strong! I rarely use it anymore but a couple of years back I was working on an app that involved bit-twiddling and the 16C fired right up and was immediately helpful.
I have an original HP11C within reach. Still works. Had to replace the batteries this year, after 20 years.
If you replace the batteries, get the good Panasonic silver cells from Newark, not "compatible" alkaline cells. The silver cells were intact after two decades.
I have one of the originals. It's useful if you do low-level programming a lot, and in a pinch you can also use it as a standard calculator. The biggest limitation is that the screen can only show 8 digits. In binary mode, this can be awkward if you're working with variables that are more than 8 bits. The calculator has functionality for scrolling around the number that's being displayed to try to work around this, but it's still annoying compared to newer calculator designs that can show more digits at once.
Treated myself to a SwissMicros DM16C [1] while waiting for HP to re-relase the original.
[1] https://www.swissmicros.com/product/dm16c
Not a DM16L? I have all the DM*C models and most of the others, not sure about the DM16L though.
Oh, you’re right, I do have the DM16L!
Help, help! I can’t escape from that site using the back button!
If this uses similar parts as the HP-15C Collector’s Edition in 2023 (which seems likely), then be advised that it doesn’t match the quality of the original in terms of display, key feel, and key labeling (colors). The back side of the 15C CE is also pretty ugly in my opinion [0] compared to the original [1].
[0] https://commerce.hpcalc.org/images/15c-ce-back-medium.jpg
[1] https://upload.wikimedia.org/wikipedia/commons/4/47/HP-15C_C...
The originals (I still have my 1987 HP-15C) used silicon-on-sapphire technology, normally used for space, that ensured the amazing battery life. The keyboard domes had a complicated fabrication process to ensure optimum feel. The keycaps were double shot for durability. No modern calculator is going to be made to that standard, it would cost at least $1000.
I’d pay that much, but alas.
I did never use a 16C, but I have a 42 at home and use it very often. It goes so far, that I also have the 42 app on my phone as a replacement for the default calculator app. I am using RPN, and I think I'm the only one in my age category that does (at least none of my friends who studied ever heard of RPN) - it's such a superior way to calculate. I usually have problems to work with a "regular" calculator due to being used to it "4, enter, 5, times" instead of "4 times 5".
If this would be a 42, I would definetely buy it. My 42 is a gift from my father and time did not only good to it.
/edit switched UPN to RPN, as I got the translation wrong
You might want to take a look at the SwissMicros DM42 and DM42n, they’re a modern reimplementation of the 42S. https://www.swissmicros.com/product/model-dm42n
Oh, that looks nice! Thanks! it's a bit early for christmas, but I'll keep that in mind :) .
You might want to consider iHP48 app, it is my goto phone/tablet calculator running a 48 ROM. My goto desk calculator is the DM42, though I occasionally use my 50g for units or on the iHP48 app instead.
This is an HP licensee, not HP itself.
Still nice to see, though the SwissMicros calculators are also very good and will be tough to compete with.
I believe it is the only official HP licensee for calculators and some former HP calculator employees work with them. This is as close as a legacy HP calculator comes today.
I think HP sold their calculator business to this company. I bought the iOS version of the 15C emulator directly from HP many years ago, but the app store changed it to this company.
An HP 48S was my constant companion during engineering school and RPN was a lovely introduction to elegant expression-scaling.
The specific ergonomic feel of those buttons remains unrivaled.
HP generously gave me a 16C at the end of an internship. It was a weird beast! Amazing a simulating different types of integer arithmetic. Not at all a replacement for the 11C, 12C, or 15C.
I wish they would re-release the HP50-g, I had one somewhere but it got lost and I _loved_ that thing!
Ugh same. I had a 49g and a 49g+ in high school. The 49g broke down and the other got robbed when my student room got burgled a couple years later.
Learned a lot of RPN programming on those things!
I saw one in the wild a couple months back but had to say it didn't live up to my memories. Super slow and clunky interfaces compared to our modern touch screens.
db48x/db50x is probably your best bet
I still have my 16C, and it still works perfectly. I got it in a swap for a 15C and 11C, so I got the reissue 15C when it came out, and it's not up to the quality of the original.
Whoa! My parents had one from back in the day. I think one of their companies gave them out.
I still remember the way the buttons made a nice tactile thunk as you pushed them.
Gosh I need one so badly. Used ones are up to about 500USD.
Pity the international shop is down
117 USD if ordered before July 31.
It's an "official licencee" so it's not actually HP manufacturing it. Still, I'd love to get one if it feels like the original.
HP hasn’t manufactured its calculators in decades, thanks to Carly Fiorina.
It's always interesting that they use ARM chips to emulate the original firmware.
if that's true, it seems really wasteful honestly. why not reimplement the functionality using a native instruction set rather then emulating some other processor?
That seems extremely efficient to me. That'd be a bad way to build a brand new calculator, perhaps, but the quickest way to get an existing, what, 40 year old?, firmware up and running with the least number of gotchas.
I doubt there are competent and cost-effective engineering teams in existence who could exactly match HP's numeric libraries in a $150 calculator that's guaranteed to sell a tiny number of units.