I play with local LLMs a lot. I've spent more on hardware than I should. I'm friends with a local group of people who have spent a lot more than I have.
The warning I would have for everyone is to temper your expectations and read the fine print carefully. The big build in article starts off with a $40K budget and then includes 4 GPUs that are $12K each. For those doing the math, this build is going to cost more like 50-55K.
Local setups also often rely on quantization and techniques like REAP to fit the models on their hardware. You will read a lot of claims that 4-bit quantization is lossless, but those claims come from KL divergence measurements on a small corpus. Use one of these 4-bit models on long context coding tasks and the quality will be noticeably less. Even for non-coding tasks like dataset analysis, I can measure a substantial quality difference between 4-bit models, 8-bit quants, and even some times the full 16-bit source.
This article is also encouraging the use of a REAP model, which means someone has cut out some of the weights to make it smaller. The idea is to remove weights that are less useful for certain tasks, but again this is going to reduce the overall quality of the output.
The trap is that people say "I'm running GLM-5.2 locally!" and it sounds amazing when you look at the GLM-5.2 benchmarks. However they're not actually running GLM-5.2, they're running a model derived from GLM-5.2 that discards most of the bits and drops some of the experts. It does not perform the same as what you see in the benchmarks. In my experience, the divergence between a quantized/REAP model and the parent model is unnoticeable when you try it on very small tasks or chat, but becomes painful when you start trying to use it on long-horizon tasks where little errors start compounding.
Then you get into the slippery slope of thinking you're $50K deep into this project, but what you really need is just one or two more of those $12K GPUs to use the next level of quantization that might improve the quality a little more and make your investment worthwhile...
All very true. Right now, running GLM 5.2 at its full BF16 quantization level needs 1.5 TB of VRAM. You can't run this locally at a usable speed for less than $250K or so, and frankly I'd be surprised if it could be done for less than $500K.
The best NV4FP quant for 5.2 appears to be lukealonso's at https://huggingface.co/lukealonso/GLM-5.2-NVFP4, and it is capable of good throughput (75-100 tps) without losing much reasoning performance. Allowing for overhead for the KV cache and other requirements, this quant will (barely) run in 8-way tensor-parallel mode on 8x RTX 6000 cards. Not too long ago it was possible to put an 8x machine together for less than $100K USD, but that's probably not true now, assuming you buy all-new components.
It'll almost certainly be worth it, given the abusive behavior we've seen and will continue to see from the major closed-model providers. If I hadn't already put a similar rig together, I'd be kicking myself. But getting it running well is by no means as simple as buying a bunch of RTX6K cards and calling it a day, and people need to know what they're getting into.
Local AI is in its Altair and IMSAI days. There's no turnkey Apple II or C64 on the market yet, much less an IBM PC. Hardware, yes -- you can buy a capable box off the shelf from various vendors -- but you have to be prepared to take up a whole new hobby when it comes to getting a complete system working well.
> hedge against the various tail risks of third-party providers raising prices
They could 10X the prices and you’d still be better off. It’s also unlikely that prices go up enough to warrant a $100K local investment to prevent paying a couple bucks per million tokens.
> or denying you service
I guess you’re not familiar with OpenRouter? There are many providers there. There are providers outside of OpenRouter. There will always be someone to take your business.
> or somehow abusing your data...
If data security is your concern then you’re better renting a server as needed still.
If you cannot tolerate any data leaving, then local models are the only way. You pay a high premium for it!
Raising prices is not a tail risk, anything a local LLM setup can do for you can be done by any cloud provider, with the same capex as yours (or less), there is no moat here, so it is highy price competitive and will remain so. If you want to speculate on hardware shortages, that is a different business altogether and you need no janky garage setup to profit.
Also agreed, it's definitely a sucker's game to run a high-end model locally, by any objective measure.
Still... if it's not your weights, running on your box, you're always going to be behind somebody else's 8-ball. Everybody has to decide for themselves where their priorities lie.
For qwen3.6-27b you can also run the q4 variant with full ~250K context on one 3090. It's fast enough to not be frustrating so the speed gains with 2x 3090s wouldn't be worth it to me. Running a q6 on 2x 3090s at half the speed with a smaller context is an option, but you're really not going to compete with SOTA models there anyway so unless you already have 2x 3090s, I would say 1 is the best investment given current prices. It's good enough to do a lot, especially with a well-configured harness.
"A great way to go is 2x RTX 3090s for a total of 48GB VRAM total. You can then run Qwen3.6-27B, which is an awesome model."
Just want to note that for $3k you can get an M5 macbook pro with 48gb of shared memory, and it will not be a giant box. Also, consider committing to spending that money on a cloud hosting provider, which will be at least somewhat cheaper if not significantly cheaper. It is awesome being able to run models locally though.
That's a reasonable option, just be aware that you get about 1/3 as much memory bandwidth with the M5 Pro, or 2/3 with the M5 Max [now you're at $4100 for the lowest-end]. So both your prefill (flops-bound, M5 has a lot less) and decode (bw-bound) will be slower.
I have an M5 MacBook Pro and I also have a separate GPU setup for running models. The difference in speed is significant. It's not just token generation speed, but time to first token (prompt processing).
The M5 hardware is amazing for what it is, but GPUs are still so much faster.
Running the models on the GPU box also means I can use the laptop on my lap instead of turning it into a hot plate.
I picked up the 128gb version when it was $2,199 and it runs Qwen 3.6 reasonably well with a 128kb context. Not very useful for complex tasks but it can handle some web stuff.
GLM 5.2 is "almost Opus," and it needs at least 8xH200s for comfortable inference (so it's closer to $400k than $40k).
They suggest using this modified model:
>A REAP-pruned (≈22% of experts removed), Int8-mix NVFP4 quantized version of GLM-5.2, ≈594B parameters.
I wonder how it behaves in practice outside of benchmarks. Qwen3.6, even at 6-bit quantization, often gets stuck in loops while reasoning. And here they've also removed some experts. I mean, sometimes an 8-bit or 16-bit small model can be smarter than a lobotomized large model. I heard the consensus is you shouldn't go below 8 bit for coding.
Also, it's not clear what is left of the available context when you try to fit a lobotomized model into 4 RTX 6000s. Anything below 100k is barely usable because it often hits compaction before it's able to gather the necessary context
P.S. found in the repos, 240k context
I agree that local LLMs are the likely future and worth investing in… but at $40k for possible-SOTA right now, this isn’t worth it for the average consumer.
I’m pretty bullish that Apple will deliver something very competitive for the average consumer in the next couple years.
Apple M series chips deserve a mention as another option, especially since you get a whole Mac laptop or desktop workstation too.
They have unified memory and respectable inference performance, and for some variations can be cheaper than video cards, especially if you get an older-gen high-end M series with a lot of RAM used or refurbished.
I've read that Apple has plans once the RAM bottleneck passes to offer more RAM in all their models, and that future M series GPUs and NPUs will be even better for local inference, so in the future I expect Apple to be a serious offering for local inference and AI research workstations.
And what about AMD and Intel Arc GPUs? They don't get as much love but I've heard they can be compelling for certain shapes of a local LLM configuration.
At this point though, I think we may be in a "renters market" for LLM compute. If you want privacy it might be better to rent GPU time in raw form or use spot pricing at various providers. It probably only makes sense to build if you have extreme privacy/security needs or just want to do it cause it's cool.
I play with local LLMs a lot. I've spent more on hardware than I should. I'm friends with a local group of people who have spent a lot more than I have.
The warning I would have for everyone is to temper your expectations and read the fine print carefully. The big build in article starts off with a $40K budget and then includes 4 GPUs that are $12K each. For those doing the math, this build is going to cost more like 50-55K.
Local setups also often rely on quantization and techniques like REAP to fit the models on their hardware. You will read a lot of claims that 4-bit quantization is lossless, but those claims come from KL divergence measurements on a small corpus. Use one of these 4-bit models on long context coding tasks and the quality will be noticeably less. Even for non-coding tasks like dataset analysis, I can measure a substantial quality difference between 4-bit models, 8-bit quants, and even some times the full 16-bit source.
This article is also encouraging the use of a REAP model, which means someone has cut out some of the weights to make it smaller. The idea is to remove weights that are less useful for certain tasks, but again this is going to reduce the overall quality of the output.
The trap is that people say "I'm running GLM-5.2 locally!" and it sounds amazing when you look at the GLM-5.2 benchmarks. However they're not actually running GLM-5.2, they're running a model derived from GLM-5.2 that discards most of the bits and drops some of the experts. It does not perform the same as what you see in the benchmarks. In my experience, the divergence between a quantized/REAP model and the parent model is unnoticeable when you try it on very small tasks or chat, but becomes painful when you start trying to use it on long-horizon tasks where little errors start compounding.
Then you get into the slippery slope of thinking you're $50K deep into this project, but what you really need is just one or two more of those $12K GPUs to use the next level of quantization that might improve the quality a little more and make your investment worthwhile...
Well you could make a REAP with better input prompts on longer context then. It’ll improve the REAP quality
All very true. Right now, running GLM 5.2 at its full BF16 quantization level needs 1.5 TB of VRAM. You can't run this locally at a usable speed for less than $250K or so, and frankly I'd be surprised if it could be done for less than $500K.
The best NV4FP quant for 5.2 appears to be lukealonso's at https://huggingface.co/lukealonso/GLM-5.2-NVFP4, and it is capable of good throughput (75-100 tps) without losing much reasoning performance. Allowing for overhead for the KV cache and other requirements, this quant will (barely) run in 8-way tensor-parallel mode on 8x RTX 6000 cards. Not too long ago it was possible to put an 8x machine together for less than $100K USD, but that's probably not true now, assuming you buy all-new components.
It'll almost certainly be worth it, given the abusive behavior we've seen and will continue to see from the major closed-model providers. If I hadn't already put a similar rig together, I'd be kicking myself. But getting it running well is by no means as simple as buying a bunch of RTX6K cards and calling it a day, and people need to know what they're getting into.
Local AI is in its Altair and IMSAI days. There's no turnkey Apple II or C64 on the market yet, much less an IBM PC. Hardware, yes -- you can buy a capable box off the shelf from various vendors -- but you have to be prepared to take up a whole new hobby when it comes to getting a complete system working well.
> It'll almost certainly be worth it, given the abusive behavior we've seen and will continue to see from the major closed-model providers.
The proper financial comparison for GLM-5.2 would be one of the providers on OpenRouter or renting a server as needed. Compare apples to apples.
You will almost certainly never break even compared to paying per token.
Local LLMs at this scale are only worth it if you have extremely strict requirements that data not leave the premises.
Or if you want to hedge against the various tail risks of third-party providers raising prices or denying you service or somehow abusing your data...
> hedge against the various tail risks of third-party providers raising prices
They could 10X the prices and you’d still be better off. It’s also unlikely that prices go up enough to warrant a $100K local investment to prevent paying a couple bucks per million tokens.
> or denying you service
I guess you’re not familiar with OpenRouter? There are many providers there. There are providers outside of OpenRouter. There will always be someone to take your business.
> or somehow abusing your data...
If data security is your concern then you’re better renting a server as needed still.
If you cannot tolerate any data leaving, then local models are the only way. You pay a high premium for it!
Raising prices is not a tail risk, anything a local LLM setup can do for you can be done by any cloud provider, with the same capex as yours (or less), there is no moat here, so it is highy price competitive and will remain so. If you want to speculate on hardware shortages, that is a different business altogether and you need no janky garage setup to profit.
Also agreed, it's definitely a sucker's game to run a high-end model locally, by any objective measure.
Still... if it's not your weights, running on your box, you're always going to be behind somebody else's 8-ball. Everybody has to decide for themselves where their priorities lie.
Is Whisper still considered SOTA for STT? Since it came out years ago, I'd have assumed there are better models by now.
For qwen3.6-27b you can also run the q4 variant with full ~250K context on one 3090. It's fast enough to not be frustrating so the speed gains with 2x 3090s wouldn't be worth it to me. Running a q6 on 2x 3090s at half the speed with a smaller context is an option, but you're really not going to compete with SOTA models there anyway so unless you already have 2x 3090s, I would say 1 is the best investment given current prices. It's good enough to do a lot, especially with a well-configured harness.
"A great way to go is 2x RTX 3090s for a total of 48GB VRAM total. You can then run Qwen3.6-27B, which is an awesome model."
Just want to note that for $3k you can get an M5 macbook pro with 48gb of shared memory, and it will not be a giant box. Also, consider committing to spending that money on a cloud hosting provider, which will be at least somewhat cheaper if not significantly cheaper. It is awesome being able to run models locally though.
I’m an idiot who is unable to project itself in situations I’ve never experienced before.
So, I always thought local LLMs were toys not worth pursuing.
Only once have I tried something decent like Gemma 4 31B and Qwen 3.6 27B did I realize how incredibly useful they are.
You stop fearing you are sharing sensitive information.
You stop fearing you will run out of tokens.
You stop fearing about the availability of the remote AI.
Local LLMs are extremely valuable.
*for many tasks
That's a reasonable option, just be aware that you get about 1/3 as much memory bandwidth with the M5 Pro, or 2/3 with the M5 Max [now you're at $4100 for the lowest-end]. So both your prefill (flops-bound, M5 has a lot less) and decode (bw-bound) will be slower.
I have an M5 MacBook Pro and I also have a separate GPU setup for running models. The difference in speed is significant. It's not just token generation speed, but time to first token (prompt processing).
The M5 hardware is amazing for what it is, but GPUs are still so much faster.
Running the models on the GPU box also means I can use the laptop on my lap instead of turning it into a hot plate.
What is your GPU setup?
The standalone mini/studio is better if you dont want to have a constantly hot laptop
Get a regular laptop and use the network to access the LLM
You can also buy a Jetson Orin with 64GB of unified memory.
I am somewhere in the middle, where I want something with more than 48GB/$2k of VRAM, but less than 384GB/$40k.
I'm curious if GMKtec's EVO-X2, with ~96GB of usable VRAM, is still a good solution for something like this for $3,399.
I picked up the 128gb version when it was $2,199 and it runs Qwen 3.6 reasonably well with a 128kb context. Not very useful for complex tasks but it can handle some web stuff.
It has lower memory bandwidth than most comparable Macs.
>$40k gets you almost-Opus
GLM 5.2 is "almost Opus," and it needs at least 8xH200s for comfortable inference (so it's closer to $400k than $40k).
They suggest using this modified model:
>A REAP-pruned (≈22% of experts removed), Int8-mix NVFP4 quantized version of GLM-5.2, ≈594B parameters.
I wonder how it behaves in practice outside of benchmarks. Qwen3.6, even at 6-bit quantization, often gets stuck in loops while reasoning. And here they've also removed some experts. I mean, sometimes an 8-bit or 16-bit small model can be smarter than a lobotomized large model. I heard the consensus is you shouldn't go below 8 bit for coding.
Also, it's not clear what is left of the available context when you try to fit a lobotomized model into 4 RTX 6000s. Anything below 100k is barely usable because it often hits compaction before it's able to gather the necessary context P.S. found in the repos, 240k context
How does this work with scaling?
I assume you can then somehow run several hundreds of prompts concurrently?
You can get amazing local STT using parakeet which can use as little as 600mb of vram. Better or as good as whisper v3 large
I agree that local LLMs are the likely future and worth investing in… but at $40k for possible-SOTA right now, this isn’t worth it for the average consumer.
I’m pretty bullish that Apple will deliver something very competitive for the average consumer in the next couple years.
Apple M series chips deserve a mention as another option, especially since you get a whole Mac laptop or desktop workstation too.
They have unified memory and respectable inference performance, and for some variations can be cheaper than video cards, especially if you get an older-gen high-end M series with a lot of RAM used or refurbished.
I've read that Apple has plans once the RAM bottleneck passes to offer more RAM in all their models, and that future M series GPUs and NPUs will be even better for local inference, so in the future I expect Apple to be a serious offering for local inference and AI research workstations.
And what about AMD and Intel Arc GPUs? They don't get as much love but I've heard they can be compelling for certain shapes of a local LLM configuration.
At this point though, I think we may be in a "renters market" for LLM compute. If you want privacy it might be better to rent GPU time in raw form or use spot pricing at various providers. It probably only makes sense to build if you have extreme privacy/security needs or just want to do it cause it's cool.
did he call Qwen a SOTA model?
No, he’s running GLM 5.2, which is closer to SOTA.