Not even “engineering” is engineering. It’s equal parts art, craft, and science. And I say that as a classically trained engineer turned software engineer. Every engineering design is a compromise - it can be light, or easy to make, or robust, or cheap, or anything else driven by requirements. There is no such thing as an optimal design unless you pin the requirements down really tight - and this is where the art part comes from.
With “classic” engineering at least you have the immutable laws of physics to judge your work, but with software we have no such luck - software is infinitely pliable in ways equivalent to bending the laws of physics in classical engineering. Your bridge may not be sound at one Earth gravity, or your software might not work reliably with a gigabyte of memory, but it’s like we can place your bridge under half G by giving the software twice as much memory. And we can do all that after building our “bridges”.
I would even suggest software engineering can also be described as “applied poetry”, where we write precise prose designed to elicit specific responses from machines, but I guess that analogy was taken by “prompt engineering”, which feels like “applied sorcery”.
I think software "engineering" is far more susceptible to fads than other engineering disciplines. Best practices in engineering evolve with respect to advances in material sciences, whereas best practices in software engineering are mostly just vibes and reactions.
This industry is continually rediscovering ancient paradigms and revisiting them in a way that would drive normal engineers nuts. I suspect it's because software engineering doesn't actually have requirements around licensure and education that slow and stabilize the arrow of progress.
Right! I think a lot of people, who have not done a lot of "things you can kick" engineering, have a very romantic view of it. Especially the relationship with whoever is nominally setting the goals of the project.
The physics works perfectly, of course. But physics is only a third of the constraint in engineering. The other two thirds are project goals and convention.
Project goals are horribly underspecified, every time. It's incredibly rare to be given a project that is completely constrained on that side, and if you do get one, most of the time it's physically impossible to achieve. This is because the people who write those specifications not doing engineering, they're doing marketing or sales or just had a cool idea. Sometimes that can even be the engineer themselves :-) So it's up to the engineer to fill in the gap, and they do it with experience and a sense of aesthetics, of sorts.
Convention is what constrains the physical possibilities of engineering to the practical. Yes, you can build anything and make it work, possibly even better than what everyone else builds. But you will have to invent and construct a lot of new technologies before you can build your perfect mousetrap. So, you settle on standard components and build a decent one instead. But this introduces a gap between physics and engineering, too. A bit of no-man's land that you can reach into to produce truly great results. But it's up to the engineer to know when it's worth it.
> we write precise prose designed to elicit specific responses from machines
There are programmers who do that, and I think it's the way to make good software, to care about what the machine actually does that is, and not just if it's easier to write one line instead of five (which is where we got this bloated framework mess from)... but it's hardly some sort of standard for the profession, much less the minimum.
With engineering (I would assume), you rarely see, say, some sort of tool (made by an engineer, that is) that has half of another tool sticking out of it in a spot "where it doesn't matter" because they preferred to ship faster. You'll never see a tool that just weighs 100x more than it needs to because hey who cares, it's not like the person who made and sold that thing actually has to use it.
With software, costs are externalized left and right because to see them, you'd have to actively think about stuff, and customers don't know anyway so anything goes, unless you go too far. But if a washing machine is the size of half a city, everyone notices.
> With “classic” engineering at least you have the immutable laws of physics to judge your work, but with software we have no such luck - software is infinitely pliable in ways equivalent to bending the laws of physics in classical engineering. Your bridge may not be sound at one Earth gravity, or your software might not work reliably with a gigabyte of memory, but it’s like we can place your bridge under half G by giving the software twice as much memory. And we can do all that after building our “bridges”.
In that example, software isn't actually "plied" (if that is a word?) though, the amount of RAM is. So the software stays as is, mediocre. And art, like engineering, often benefits from constraints. Imagine if the solution to being a shitty artist would be to just drug the audience so they're happier and like whatever they're seeing more. Even if it benefited them, even if you could tell them and they'd be fine with it, that's not the way to hone a craft, that just seems obvious on the surface to me.
The article is "not even wrong". Most of the argument just circles around an inconsistent definition of what "real world" means.
> Remember "imaginary numbers" from algebra? You could do funky stuff with them like take the square root of negative nine. Imaginary numbers are generally useless for the physical world that we experience. However, they turned out to be very useful in the field of electronics. More specifically, they had predictive power in the field of electronics. Using imaginary number math, one can predict behavior of electrons and the accuracy of such predictions in models can be measured.
Like here, I struggle to understand what the point is. Is predicting the behavior of electronics "useless for the physical world we experience"? And that's ignoring the author's apparent ignorance of all the other ways in which complex numbers are useful in the physical world besides taking negative numbers' square roots.
Engineering is a profession where individuals are certified by a governing body and required to maintain that certification through continuing education. The reason for that certification is because failure to follow the principles of the governing body can lead to injury or death, or to a lesser degree significant costs.
Given all the ways that software can have those same significant impacts, I believe that there should be some sort of level at which software developers are called engineers. However, I believe that designation should come with all the professional oversight that other engineering disciplines have.
Because that diminishes the work people do. A programmer takes logic and encodes it for a machine to execute. Being an engineer suggests solving problems and defining logic.
The engineer title is apt in my opinion, because if you look at construction as a parallel, the architect designs the shape of the building, engineers determine how to build it so it doesn't collapse, and builders actually make it real. Programming is like digital building, the architecture and implementation details are both separate.
Centuries of accumulated respect for the word "engineer", implying a specialization that can't be simply replaced with other skill sets. That is: prestige and therefore economic incentives.
Skimmed through, and it sort of confirms my own experience: when a problem isn't approached with an engineering mindset, the resulting work also doesn't qualify as engineering.
The article seems to make some fairly confusing statements. Why is the bar higher for software engineering, than that of civil engineering otherwise? Statements such as:
> "there is no objective reality inside software"
> "if there are many solutions to the same problem, which one is "better"?"
Is the exact same subjective goal that a objective engineering constraint has in any other engineering field. There are many ways to design and build a bridge, but the engineering aspect of it needs to model reality and account for it in such a way that the bridge to build conforms to said requirements, in a provable way. That's why engineers can be held responsible when mistakes are made.
Software Engineering can be done in the same way. This, however, depends entirely on the culture. My first decade in the field, I was fortunate to only be exposed to en environment and culture that developed software in a provably correct way, or at the very least, aspired to. The latter decade, not so fortunate. With the advent of generative AI, it's become far worse. The challenge is to carve out enough space outside the purview of "management" that wants problems solved with particular tools, regardless of applicability to said problems, and it's becoming insurmountable. Signal to noise disappearing. The idea of buying land and tending to a farm, evermore appealing.
I wonder if the author perhaps has not worked on software that comes with actual engineering constraints. There are plenty of software systems where <if it doesn't work as it should>, people die.
In my country (France), being an engineer (ingénieur, in French) is regulated but tied to a particular degree (which must be approved by the Commission des titres d'ingénieur), and as such I am legally a software engineer.
The title "ingénieur" is not regulated, it is a job title and anyone can have it if the position calls for it.
What is regulated however is the engineering degree ("diplôme d'ingénieur"), only some schools recognized by the state ("grandes écoles") can deliver it. It gives you the right to call yourself "ingénieur diplômé". Internationally, it counts as a masters degree.
Administratively, regulated professions (including doctors, lawyers, architects, etc... but not engineers in general) are regulated by the ministry of work, while the engineering degree is regulated by the ministry of education.
I am well aware of all that because my school went through the process of getting approval from the "Commission des Titres d'Ingénieur" while I was studying there so it was a pretty hot topic. The result is that I don't have an engineering degree (but I have a "degree in engineering", equivalent to a regular masters degree, love the play on words) but the next promotions do, but my job title is still "engineer" in any case.
Same here in Poland. I believe the equivalent term in English is "Bachelor of Engineering". Four years instead of the regular three to obtain a typical bachelor's degree.
I studied at a technical university at its faculty of electrical engineering, but those who study at a "normal" university indeed go through the usual three years and are not engineers.
I guess the main difference is that I learned about analog circuits, semiconductors and all that, while those other guys didn't.
I don't have any special professional certificates, though I could optionally enroll on a course allowing me to work with voltages up to 1000V.
In the US, professional licensure is left to the states, and most states have some form of licensing for engineers along with reciprocity for transferring a license from one state to another. Commonly, engineers have an "industrial exemption" if they work for a company that makes a product rather than offering engineering services directly to the public (such as a civil or structural engineer might do).
I've held an "engineer" title at my day job from time to time, though I'm not an engineer and have no engineering degree. Only a couple of engineers at my work site have licenses. On the other hand, my brother in law was a nuclear engineer, and all of the engineers at the power plant were licensed.
One thing you'll notice is that small companies that do contract or consulting work will call themselves "research" or "technology" rather than using the E word on their web page.
It many countries it actually is, if you call yourself an engineer professionally without a license you can be heavily fined. Canada, Germany, France..
Ok, then there is regulated engineering and unregulated engineering. If you are doing engineering and it's not regulated (for many different reasons) it does not make it any less engineering. Animals do engineering, insects go engineering, it is based on science (empirical), whether they know it or not.
> Animals do engineering, insects go engineering, it is based on science (empirical), whether they know it or not.
I've never heard "instinctively doing things without conscious choice" to be engineering. That opens it up so wide it's meaningless - is blinking to rewet my eyeballs engineering? How about farting to relieve internal pressure?
And "empirical" explicitly means you consciously understand the reasons, so your comment is self-contradictory as well. Basically, words have meanings and you don't seem to know them.
I could be stretching, but to me, this is very conscious and intentional work, perfected through experience and there are many way to get it wrong. What exactly would we call this?
From knowing many different types of engineers, not only does software engineering fall pretty neatly within that group of jobs but also software is an integral part of their engineering practices. I know some people who are designing planes and if software isn't an engineering discipline I guess I need to tell them they recently became not engineers (though maybe because they occasionally use physics equations the author would say they still are. It's a silly distinction). The argument seems mostly based on their personal definition of engineering, which doesn't seem useful to me (a quick reading of a dictionary would make it seem that software engineering false very neatly within definition 2b https://www.merriam-webster.com/dictionary/engineering)
Overall though I found this post incredibly hard to read. It's incredibly long and wordy though that's par for the course for these petty semantic arguments.
I had a professor that used to say that engineering is modelling problems with a set of differential equations and finding a numerical approximation to the solution. No differential equation ==> Not engineering.
Except for when it is, the constraints of software engineers has always been bound to the constraints of Classic Computing, but over the years we've abstracted that away to the point of where many in the field may not even realize it.
Fine, but then what am I? I'm certainly not a scientist. And calling me a "programmer" is like calling an accountant a "calculator".
I design solutions to computational problems. I also happen to implement them a lot of the time, because code was trivial to implement even before LLMs. What does that make me if not an engineer? I'm open to suggestions.
If someone told me I couldn't call myself an engineer and instead I had to call myself a software developer, I'd turn around and tell them I just forgot all my theoretical computer science, and of course we can do a bubble sort on the multi-terabyte database, LOL.
I think engineering is about norms and regulations. Creating solutions for problems can be done in a very wide spectrum, but the restricted window where you try to respect books of rules is what people call engineering.
That said, there's been a lot of changes since this was written that was relevant to the point being made, so I'm not sure I necessarily disagree with the article as written at the time. If we take the metric I used in that blog post and asked "what if we were handed current-gen AI in 2006, how well would it do?", my answer is that it would do noticeably less well. This is even more true if we instead go back to 2006 and use current hardware tech but have to train on what was available at the time.
Source control was fairly popular at that point, although it hadn't penetrated everywhere yet. I don't recall a lot of curmudgeons complaining that Real Programmers Don't Need Source Control at the time, it was pretty obvious that a record of what was happening in the source code base was useful. However, IIRC, in the open source world we'd mostly have been on cvs. svn was well into the process of eating it but still had a ways to go yet. "git" had just barely been born and it would be years before it was a serious force.
Beyond that, a lot of stuff I take for granted in the engineering domain was either immature or non-existent. I was on the cutting edge bothering everyone about the importance of unit testing. There were communities like Perl that had a strong culture of it and a lot of support, but still a lot of people who would use it without that and a lot of language communities without the culture. A lot of projects banged together their own haphazard solutions, but a lot of projects just went without. No devops. Metrics was something I'd never really heard of. Logs probably went to your disk and the idea of unifying them was just at the beginning. QA was much less established. QA was generally not a team that would be using much automation, it would be all hand testing. CI/CD wasn't a term yet because hardly anyone had anything even resembling it. Bug trackers were still pretty bad and not everyone used them.
I'm sure a lot of people will go "yeah, but I was programming in 2006 and I had all those things", because there were certainly teams that did. Go look at Microsoft Window's dev team, for instance, and they'd have most of what we'd consider a modern development stack, albeit with some quirks we'd find odd. It's not that none of this existed, it's that it wasn't considered just the baseline for a project to be minimally competent the way it is now. And rather than the programmers having an abundance of free options and an even larger abundance of paid and hosted options, to the point it's hard to poke through them all, they're using one of a few very expensive vendors or they put it together themselves.
Introducing an AI into a code base of tens or hundreds of thousands of lines, with minimal testing, trained on the code practices of that era... a modern programmer could probably still work with it. You could tell it about unit testing and it would know what you meant, it would probably just need to be prompted to do it. You could put together unified logging with some work. You could solve the problems... but your solutions would basically be putting in those 2026 guard rails. You'd have the same uphill battle convincing people of the time that this wasn't just a nice-to-have but a bare necessity, though it would be a much less uphill battle when you have a tool that can do it with a lot less effort, making the cost/benefit tradeoff a lot more appealing when the cost is so much lower. But a lot of programmers of the time would make even larger messes even more quickly with AIs happy to do so if you didn't give them some guidance on how to use it. They would, of course, figure it out eventually, since "they" are also "us", and we collectively figured this out without AIs helping us along. But boy oh boy would there be some messes made first.
I think some element of the problem is that, yes, programming was once a wild and wooly frontier of cowboys and crazy people doing crazy things. But one step at a time, the field has grown up, and a lot of people haven't noticed and still have this "cowboy programmer" idea in their mind. I don't know exactly when you might want to say the field became a real engineering field, with its own practices based on the local cost/benefit tradeoffs and its own procedures and its own "bare minimum for competence" standards. That partially depends on your own definitions. Some people who want to put the "bare minimum" at something like "uses dependent types and carries proofs for every line of code" might say we're not there yet, but you can always set the bar higher. But I think a lot of people have not looked around and realized that, yeah, actually, we have crossed that bar.
Personally I put it around a decade ago. But I think we're there. We can stop wringing our hands about not being "real engineers" and stop looking over at what the "real engineers" do. We have better solutions for our problems then any amount of copying what they do could give us, just like they can't just lift our practices and apply it to their work because it doesn't fit their world. It's gotten to the point where dropping what we've got in hand now and trying to jam some other "real engineering" discipline's tools in would be a rather substantial regression. We can chill out a bit.
We can also be glad that all the calls to try to systematize the field so it would be "real engineering" didn't go and lock in the 2006 idea of what "good software engineering" is so that we got stuck to it and we couldn't progress to where we are today. Two years ago I would have said maybe such an effort could do something useful, but then AI came along and overturned the apple cart and now, once again, I would be very suspicious of any attempt to lock in July 2026 practices as The One Correct Way To Write Software For The Next 100 Years.
Thankfully; else we'd have big heavy things with real claws and kinetic force grabbing at us endlessly, snatching our wallets with too much precision. We'd need Arnold not AdBlock, just to leave the house.
I'd say software engineering better fits economics these days. Maybe with a Psych major to maximize the dark patterns.
Dave Farley has done some writing on what makes "Software Engineering" "Engineering"
e.g. his 2021 book " Modern Software Engineering"
> Software engineering is the application of an empirical, scientific approach to finding efficient, economic solutions to practical problems in software.
Dave Farley's book is really good, and I'd highly recommend it.
However, I do have an issue with his focus on applying science in the definition, even though it doesn't come across in his final conclusions. In the history of engineering, that's a relatively new development. It started, to some extent, in Europe in the 1700s, but it really took off in the 1920s and exploded in the United States after World War II (1940s-1950s). It culminated with the Report of the Committee on Evaluation of Engineering Education (the Grinter Report) in the mid-1950s.
This isn't to say that science isn't important to engineering, since it absolutely is. Science provides knowledge used to better understand the world being changed by engineering. But there are also plenty of examples of engineering going ahead of science - the steam engine, the airplane, generative AI. We didn't fully understand the governing rules before the technology existed.
Any definition of engineering needs to be broader. Ferguson (Engineering and the Mind's Eye), Florman (several works, but primarily The Existential Pleasures of Engineering), and Vincenti (What Engineers Know and How They Know It) all explore ways in which engineering can't rely on science alone. I think Koen (Discussion of the Method) puts it best, where the application of science is one heuristic that engineers may choose to draw upon.
> However, I do have an issue with his focus on applying science in the definition, even though it doesn't come across in his final conclusions
I don’t think it’s about science. It’s about the scientific method. From wikipedia
The scientific method is an empirical method for acquiring knowledge through careful observation, rigorous skepticism, hypothesis testing, and experimental validation
You don’t have to have a full theory or model to follow. You also can follow your intuition and use your creativity. You just have to carefully compare your results to your goal.
For me, a great example of where software engineering meets head to head with classical engineering is, eg SolidWorks, etc. Seeing a program mimic the physics of real moving parts, responding to many variables, etc, is to me, engineering plus, then some.
>An engineer's model must be tightly bound to the laws of physics and chemistry.
Anything that exists in reality and is observable by definition is tightly bound by the laws of physics and chemistry. Software is too.
>Software is a lot like math,
Probably referring to computer science. Computer science is neither about computers nor is it a science. It is a math. Software is like math but applied.
>The only limitation is the imagination of the creator of the virtual world (and perhaps the pesky limitations of computer resources)
computer resources: AKA physical laws. And these "laws" highly limit us in what we can do. We are definetely not operating in some kind of playground where we can be virtual gods, not even close, that's why entire swe teams are involved and paid a lot in software.
Honestly the main difference between "Software Engineering" and "Engineering" is that software is more an "art". We make up a bunch of technical nomenclature for it (like design patterns which sounds technical but is mostly made up and more artsy then say statistical mechanics) but it's mostly similar to sculpture or some artistic creation as we sort of piece everything together by instinct.
The difference between this and engineering is usually engineering involves mathematical modeling and testing heavily in development, while software engineering (usually) does not involve mathematical modeling and software testing is more of a catch-all to find bugs.
Type checking is mathematical modeling, but I wouldn't call it the core of software engineering. I guess this is where the categories get blurry.
> software engineering does not involve mathematical modeling
it absolutely can, approximately nobody was doing that because it was insanely expensive. if we narrow down the definitions, modern static typing (where modern means universally accepted nowadays) is a form of mathematical modeling and proof construction that software does what it says it does.
the economic calculation is changing extremely rapidly now with LLMs though. some of my software is now proved to be correct at some levels, e.g. I heavily (that is, LLMs I pilot) use TLA+ for tricky but nowhere near foundational distributed systems work (as in, I don't work on core S3, but do distributed transaction stuff).
> Anything that exists in reality and is observable by definition is tightly bound by the laws of physics and chemistry. Software is too.
Agreed. If I have to guess, the relevant fields in physics for software engineering would be quantum mechanics and thermodynamics. Of course, we don't see any direct relation as of now but it feel it should be important to determine the physical basis of software. The basis of software cannot be just math. It has to be physics.
> > An engineer's model must be tightly bound to the laws of physics and chemistry.
> Anything that exists in reality and is observable by definition is tightly bound by the laws of physics and chemistry. Software is too.
No. Software is only loosely bound by physics and chemistry. Sure, the bounds exist - they're real - but most software, most of the time, does not bump into them much at all.
But
> > An engineer's model must be tightly bound to the laws of physics and chemistry.
is also wrong. This is using a pre-software definition of engineering to try to define software engineering. It would be like trying to use a pre-Faraday definition of physics to define microwave engineering.
Not even “engineering” is engineering. It’s equal parts art, craft, and science. And I say that as a classically trained engineer turned software engineer. Every engineering design is a compromise - it can be light, or easy to make, or robust, or cheap, or anything else driven by requirements. There is no such thing as an optimal design unless you pin the requirements down really tight - and this is where the art part comes from.
With “classic” engineering at least you have the immutable laws of physics to judge your work, but with software we have no such luck - software is infinitely pliable in ways equivalent to bending the laws of physics in classical engineering. Your bridge may not be sound at one Earth gravity, or your software might not work reliably with a gigabyte of memory, but it’s like we can place your bridge under half G by giving the software twice as much memory. And we can do all that after building our “bridges”.
I would even suggest software engineering can also be described as “applied poetry”, where we write precise prose designed to elicit specific responses from machines, but I guess that analogy was taken by “prompt engineering”, which feels like “applied sorcery”.
I think software "engineering" is far more susceptible to fads than other engineering disciplines. Best practices in engineering evolve with respect to advances in material sciences, whereas best practices in software engineering are mostly just vibes and reactions.
* Object oriented / functional * Thick client, thin client * Blockchain * NoSQL vs relational * Enterprise SOA * Framework churn
This industry is continually rediscovering ancient paradigms and revisiting them in a way that would drive normal engineers nuts. I suspect it's because software engineering doesn't actually have requirements around licensure and education that slow and stabilize the arrow of progress.
Right! I think a lot of people, who have not done a lot of "things you can kick" engineering, have a very romantic view of it. Especially the relationship with whoever is nominally setting the goals of the project.
The physics works perfectly, of course. But physics is only a third of the constraint in engineering. The other two thirds are project goals and convention.
Project goals are horribly underspecified, every time. It's incredibly rare to be given a project that is completely constrained on that side, and if you do get one, most of the time it's physically impossible to achieve. This is because the people who write those specifications not doing engineering, they're doing marketing or sales or just had a cool idea. Sometimes that can even be the engineer themselves :-) So it's up to the engineer to fill in the gap, and they do it with experience and a sense of aesthetics, of sorts.
Convention is what constrains the physical possibilities of engineering to the practical. Yes, you can build anything and make it work, possibly even better than what everyone else builds. But you will have to invent and construct a lot of new technologies before you can build your perfect mousetrap. So, you settle on standard components and build a decent one instead. But this introduces a gap between physics and engineering, too. A bit of no-man's land that you can reach into to produce truly great results. But it's up to the engineer to know when it's worth it.
> we write precise prose designed to elicit specific responses from machines
There are programmers who do that, and I think it's the way to make good software, to care about what the machine actually does that is, and not just if it's easier to write one line instead of five (which is where we got this bloated framework mess from)... but it's hardly some sort of standard for the profession, much less the minimum.
With engineering (I would assume), you rarely see, say, some sort of tool (made by an engineer, that is) that has half of another tool sticking out of it in a spot "where it doesn't matter" because they preferred to ship faster. You'll never see a tool that just weighs 100x more than it needs to because hey who cares, it's not like the person who made and sold that thing actually has to use it.
With software, costs are externalized left and right because to see them, you'd have to actively think about stuff, and customers don't know anyway so anything goes, unless you go too far. But if a washing machine is the size of half a city, everyone notices.
> With “classic” engineering at least you have the immutable laws of physics to judge your work, but with software we have no such luck - software is infinitely pliable in ways equivalent to bending the laws of physics in classical engineering. Your bridge may not be sound at one Earth gravity, or your software might not work reliably with a gigabyte of memory, but it’s like we can place your bridge under half G by giving the software twice as much memory. And we can do all that after building our “bridges”.
In that example, software isn't actually "plied" (if that is a word?) though, the amount of RAM is. So the software stays as is, mediocre. And art, like engineering, often benefits from constraints. Imagine if the solution to being a shitty artist would be to just drug the audience so they're happier and like whatever they're seeing more. Even if it benefited them, even if you could tell them and they'd be fine with it, that's not the way to hone a craft, that just seems obvious on the surface to me.
Did you just call me poet sorcerer? Lol
Cool analogies
My wife says I’m a computer charmer. I prefer to say I write executable poetry that moves the hearts of machines.
The article is "not even wrong". Most of the argument just circles around an inconsistent definition of what "real world" means.
> Remember "imaginary numbers" from algebra? You could do funky stuff with them like take the square root of negative nine. Imaginary numbers are generally useless for the physical world that we experience. However, they turned out to be very useful in the field of electronics. More specifically, they had predictive power in the field of electronics. Using imaginary number math, one can predict behavior of electrons and the accuracy of such predictions in models can be measured.
Like here, I struggle to understand what the point is. Is predicting the behavior of electronics "useless for the physical world we experience"? And that's ignoring the author's apparent ignorance of all the other ways in which complex numbers are useful in the physical world besides taking negative numbers' square roots.
Engineering is a profession where individuals are certified by a governing body and required to maintain that certification through continuing education. The reason for that certification is because failure to follow the principles of the governing body can lead to injury or death, or to a lesser degree significant costs.
Given all the ways that software can have those same significant impacts, I believe that there should be some sort of level at which software developers are called engineers. However, I believe that designation should come with all the professional oversight that other engineering disciplines have.
Why don’t we just call ourselves programmers and save this semi-regular debate!
Because that diminishes the work people do. A programmer takes logic and encodes it for a machine to execute. Being an engineer suggests solving problems and defining logic.
The engineer title is apt in my opinion, because if you look at construction as a parallel, the architect designs the shape of the building, engineers determine how to build it so it doesn't collapse, and builders actually make it real. Programming is like digital building, the architecture and implementation details are both separate.
Because I haven't been allowed to program for 6 months. Now I'm just an AI manager.
Centuries of accumulated respect for the word "engineer", implying a specialization that can't be simply replaced with other skill sets. That is: prestige and therefore economic incentives.
Skimmed through, and it sort of confirms my own experience: when a problem isn't approached with an engineering mindset, the resulting work also doesn't qualify as engineering.
The article seems to make some fairly confusing statements. Why is the bar higher for software engineering, than that of civil engineering otherwise? Statements such as:
> "there is no objective reality inside software"
> "if there are many solutions to the same problem, which one is "better"?"
Is the exact same subjective goal that a objective engineering constraint has in any other engineering field. There are many ways to design and build a bridge, but the engineering aspect of it needs to model reality and account for it in such a way that the bridge to build conforms to said requirements, in a provable way. That's why engineers can be held responsible when mistakes are made.
Software Engineering can be done in the same way. This, however, depends entirely on the culture. My first decade in the field, I was fortunate to only be exposed to en environment and culture that developed software in a provably correct way, or at the very least, aspired to. The latter decade, not so fortunate. With the advent of generative AI, it's become far worse. The challenge is to carve out enough space outside the purview of "management" that wants problems solved with particular tools, regardless of applicability to said problems, and it's becoming insurmountable. Signal to noise disappearing. The idea of buying land and tending to a farm, evermore appealing.
I wonder if the author perhaps has not worked on software that comes with actual engineering constraints. There are plenty of software systems where <if it doesn't work as it should>, people die.
Crypto is not the OG cryptography! GenAI is not the OG AI!
Language is for us, not the other way around. It's common usage changes.
Engineering is a regulated term, afaik that’s what underlies the debate, it’s not about whether English has changed.
In my country (France), being an engineer (ingénieur, in French) is regulated but tied to a particular degree (which must be approved by the Commission des titres d'ingénieur), and as such I am legally a software engineer.
In France, it is somewhat more complicated.
The title "ingénieur" is not regulated, it is a job title and anyone can have it if the position calls for it.
What is regulated however is the engineering degree ("diplôme d'ingénieur"), only some schools recognized by the state ("grandes écoles") can deliver it. It gives you the right to call yourself "ingénieur diplômé". Internationally, it counts as a masters degree.
Administratively, regulated professions (including doctors, lawyers, architects, etc... but not engineers in general) are regulated by the ministry of work, while the engineering degree is regulated by the ministry of education.
I am well aware of all that because my school went through the process of getting approval from the "Commission des Titres d'Ingénieur" while I was studying there so it was a pretty hot topic. The result is that I don't have an engineering degree (but I have a "degree in engineering", equivalent to a regular masters degree, love the play on words) but the next promotions do, but my job title is still "engineer" in any case.
Same here in Poland. I believe the equivalent term in English is "Bachelor of Engineering". Four years instead of the regular three to obtain a typical bachelor's degree.
I studied at a technical university at its faculty of electrical engineering, but those who study at a "normal" university indeed go through the usual three years and are not engineers.
I guess the main difference is that I learned about analog circuits, semiconductors and all that, while those other guys didn't.
I don't have any special professional certificates, though I could optionally enroll on a course allowing me to work with voltages up to 1000V.
Same in Poland and I imagine all of other countries in Europe which follow Bologna Process.
Same in Greece, my degree is an engineering degree and I was enrolled to the engineers' guild when I graduated.
Engineering is not a regulated term everywhere.
In the US, professional licensure is left to the states, and most states have some form of licensing for engineers along with reciprocity for transferring a license from one state to another. Commonly, engineers have an "industrial exemption" if they work for a company that makes a product rather than offering engineering services directly to the public (such as a civil or structural engineer might do).
I've held an "engineer" title at my day job from time to time, though I'm not an engineer and have no engineering degree. Only a couple of engineers at my work site have licenses. On the other hand, my brother in law was a nuclear engineer, and all of the engineers at the power plant were licensed.
One thing you'll notice is that small companies that do contract or consulting work will call themselves "research" or "technology" rather than using the E word on their web page.
It many countries it actually is, if you call yourself an engineer professionally without a license you can be heavily fined. Canada, Germany, France..
I don't think you can be fined in France for that. Though I think you'll be fired without compensation or unemployment benefits.
Ok, then there is regulated engineering and unregulated engineering. If you are doing engineering and it's not regulated (for many different reasons) it does not make it any less engineering. Animals do engineering, insects go engineering, it is based on science (empirical), whether they know it or not.
We need to stop redefining terms.
> Animals do engineering, insects go engineering, it is based on science (empirical), whether they know it or not.
I've never heard "instinctively doing things without conscious choice" to be engineering. That opens it up so wide it's meaningless - is blinking to rewet my eyeballs engineering? How about farting to relieve internal pressure?
And "empirical" explicitly means you consciously understand the reasons, so your comment is self-contradictory as well. Basically, words have meanings and you don't seem to know them.
https://brainbound.blog/dams-animal-engineering-impact
I could be stretching, but to me, this is very conscious and intentional work, perfected through experience and there are many way to get it wrong. What exactly would we call this?
From knowing many different types of engineers, not only does software engineering fall pretty neatly within that group of jobs but also software is an integral part of their engineering practices. I know some people who are designing planes and if software isn't an engineering discipline I guess I need to tell them they recently became not engineers (though maybe because they occasionally use physics equations the author would say they still are. It's a silly distinction). The argument seems mostly based on their personal definition of engineering, which doesn't seem useful to me (a quick reading of a dictionary would make it seem that software engineering false very neatly within definition 2b https://www.merriam-webster.com/dictionary/engineering)
Overall though I found this post incredibly hard to read. It's incredibly long and wordy though that's par for the course for these petty semantic arguments.
I had a professor that used to say that engineering is modelling problems with a set of differential equations and finding a numerical approximation to the solution. No differential equation ==> Not engineering.
Except for when it is, the constraints of software engineers has always been bound to the constraints of Classic Computing, but over the years we've abstracted that away to the point of where many in the field may not even realize it.
Fine, but then what am I? I'm certainly not a scientist. And calling me a "programmer" is like calling an accountant a "calculator".
I design solutions to computational problems. I also happen to implement them a lot of the time, because code was trivial to implement even before LLMs. What does that make me if not an engineer? I'm open to suggestions.
Software developer?
If someone told me I couldn't call myself an engineer and instead I had to call myself a software developer, I'd turn around and tell them I just forgot all my theoretical computer science, and of course we can do a bubble sort on the multi-terabyte database, LOL.
I just work here. The label is for everyone else :)
I think engineering is about norms and regulations. Creating solutions for problems can be done in a very wide spectrum, but the restricted window where you try to respect books of rules is what people call engineering.
Yes, it is: https://jerf.org/iri/post/2026/programming_is_engineering/
That said, there's been a lot of changes since this was written that was relevant to the point being made, so I'm not sure I necessarily disagree with the article as written at the time. If we take the metric I used in that blog post and asked "what if we were handed current-gen AI in 2006, how well would it do?", my answer is that it would do noticeably less well. This is even more true if we instead go back to 2006 and use current hardware tech but have to train on what was available at the time.
Source control was fairly popular at that point, although it hadn't penetrated everywhere yet. I don't recall a lot of curmudgeons complaining that Real Programmers Don't Need Source Control at the time, it was pretty obvious that a record of what was happening in the source code base was useful. However, IIRC, in the open source world we'd mostly have been on cvs. svn was well into the process of eating it but still had a ways to go yet. "git" had just barely been born and it would be years before it was a serious force.
Beyond that, a lot of stuff I take for granted in the engineering domain was either immature or non-existent. I was on the cutting edge bothering everyone about the importance of unit testing. There were communities like Perl that had a strong culture of it and a lot of support, but still a lot of people who would use it without that and a lot of language communities without the culture. A lot of projects banged together their own haphazard solutions, but a lot of projects just went without. No devops. Metrics was something I'd never really heard of. Logs probably went to your disk and the idea of unifying them was just at the beginning. QA was much less established. QA was generally not a team that would be using much automation, it would be all hand testing. CI/CD wasn't a term yet because hardly anyone had anything even resembling it. Bug trackers were still pretty bad and not everyone used them.
I'm sure a lot of people will go "yeah, but I was programming in 2006 and I had all those things", because there were certainly teams that did. Go look at Microsoft Window's dev team, for instance, and they'd have most of what we'd consider a modern development stack, albeit with some quirks we'd find odd. It's not that none of this existed, it's that it wasn't considered just the baseline for a project to be minimally competent the way it is now. And rather than the programmers having an abundance of free options and an even larger abundance of paid and hosted options, to the point it's hard to poke through them all, they're using one of a few very expensive vendors or they put it together themselves.
Introducing an AI into a code base of tens or hundreds of thousands of lines, with minimal testing, trained on the code practices of that era... a modern programmer could probably still work with it. You could tell it about unit testing and it would know what you meant, it would probably just need to be prompted to do it. You could put together unified logging with some work. You could solve the problems... but your solutions would basically be putting in those 2026 guard rails. You'd have the same uphill battle convincing people of the time that this wasn't just a nice-to-have but a bare necessity, though it would be a much less uphill battle when you have a tool that can do it with a lot less effort, making the cost/benefit tradeoff a lot more appealing when the cost is so much lower. But a lot of programmers of the time would make even larger messes even more quickly with AIs happy to do so if you didn't give them some guidance on how to use it. They would, of course, figure it out eventually, since "they" are also "us", and we collectively figured this out without AIs helping us along. But boy oh boy would there be some messes made first.
I think some element of the problem is that, yes, programming was once a wild and wooly frontier of cowboys and crazy people doing crazy things. But one step at a time, the field has grown up, and a lot of people haven't noticed and still have this "cowboy programmer" idea in their mind. I don't know exactly when you might want to say the field became a real engineering field, with its own practices based on the local cost/benefit tradeoffs and its own procedures and its own "bare minimum for competence" standards. That partially depends on your own definitions. Some people who want to put the "bare minimum" at something like "uses dependent types and carries proofs for every line of code" might say we're not there yet, but you can always set the bar higher. But I think a lot of people have not looked around and realized that, yeah, actually, we have crossed that bar.
Personally I put it around a decade ago. But I think we're there. We can stop wringing our hands about not being "real engineers" and stop looking over at what the "real engineers" do. We have better solutions for our problems then any amount of copying what they do could give us, just like they can't just lift our practices and apply it to their work because it doesn't fit their world. It's gotten to the point where dropping what we've got in hand now and trying to jam some other "real engineering" discipline's tools in would be a rather substantial regression. We can chill out a bit.
We can also be glad that all the calls to try to systematize the field so it would be "real engineering" didn't go and lock in the 2006 idea of what "good software engineering" is so that we got stuck to it and we couldn't progress to where we are today. Two years ago I would have said maybe such an effort could do something useful, but then AI came along and overturned the apple cart and now, once again, I would be very suspicious of any attempt to lock in July 2026 practices as The One Correct Way To Write Software For The Next 100 Years.
Thankfully; else we'd have big heavy things with real claws and kinetic force grabbing at us endlessly, snatching our wallets with too much precision. We'd need Arnold not AdBlock, just to leave the house.
I'd say software engineering better fits economics these days. Maybe with a Psych major to maximize the dark patterns.
Dave Farley has done some writing on what makes "Software Engineering" "Engineering"
e.g. his 2021 book " Modern Software Engineering"
> Software engineering is the application of an empirical, scientific approach to finding efficient, economic solutions to practical problems in software.
https://www.davefarley.net/?p=352
https://www.goodreads.com/en/book/show/57345270-modern-softw...
https://productdeveloper.net/modern-software-engineering/
Dave Farley's book is really good, and I'd highly recommend it.
However, I do have an issue with his focus on applying science in the definition, even though it doesn't come across in his final conclusions. In the history of engineering, that's a relatively new development. It started, to some extent, in Europe in the 1700s, but it really took off in the 1920s and exploded in the United States after World War II (1940s-1950s). It culminated with the Report of the Committee on Evaluation of Engineering Education (the Grinter Report) in the mid-1950s.
This isn't to say that science isn't important to engineering, since it absolutely is. Science provides knowledge used to better understand the world being changed by engineering. But there are also plenty of examples of engineering going ahead of science - the steam engine, the airplane, generative AI. We didn't fully understand the governing rules before the technology existed.
Any definition of engineering needs to be broader. Ferguson (Engineering and the Mind's Eye), Florman (several works, but primarily The Existential Pleasures of Engineering), and Vincenti (What Engineers Know and How They Know It) all explore ways in which engineering can't rely on science alone. I think Koen (Discussion of the Method) puts it best, where the application of science is one heuristic that engineers may choose to draw upon.
> However, I do have an issue with his focus on applying science in the definition, even though it doesn't come across in his final conclusions
I don’t think it’s about science. It’s about the scientific method. From wikipedia
You don’t have to have a full theory or model to follow. You also can follow your intuition and use your creativity. You just have to carefully compare your results to your goal.For me, a great example of where software engineering meets head to head with classical engineering is, eg SolidWorks, etc. Seeing a program mimic the physics of real moving parts, responding to many variables, etc, is to me, engineering plus, then some.
>An engineer's model must be tightly bound to the laws of physics and chemistry.
Anything that exists in reality and is observable by definition is tightly bound by the laws of physics and chemistry. Software is too.
>Software is a lot like math,
Probably referring to computer science. Computer science is neither about computers nor is it a science. It is a math. Software is like math but applied.
>The only limitation is the imagination of the creator of the virtual world (and perhaps the pesky limitations of computer resources)
computer resources: AKA physical laws. And these "laws" highly limit us in what we can do. We are definetely not operating in some kind of playground where we can be virtual gods, not even close, that's why entire swe teams are involved and paid a lot in software.
Honestly the main difference between "Software Engineering" and "Engineering" is that software is more an "art". We make up a bunch of technical nomenclature for it (like design patterns which sounds technical but is mostly made up and more artsy then say statistical mechanics) but it's mostly similar to sculpture or some artistic creation as we sort of piece everything together by instinct.
The difference between this and engineering is usually engineering involves mathematical modeling and testing heavily in development, while software engineering (usually) does not involve mathematical modeling and software testing is more of a catch-all to find bugs.
Type checking is mathematical modeling, but I wouldn't call it the core of software engineering. I guess this is where the categories get blurry.
> software engineering does not involve mathematical modeling
it absolutely can, approximately nobody was doing that because it was insanely expensive. if we narrow down the definitions, modern static typing (where modern means universally accepted nowadays) is a form of mathematical modeling and proof construction that software does what it says it does.
the economic calculation is changing extremely rapidly now with LLMs though. some of my software is now proved to be correct at some levels, e.g. I heavily (that is, LLMs I pilot) use TLA+ for tricky but nowhere near foundational distributed systems work (as in, I don't work on core S3, but do distributed transaction stuff).
> Anything that exists in reality and is observable by definition is tightly bound by the laws of physics and chemistry. Software is too.
Agreed. If I have to guess, the relevant fields in physics for software engineering would be quantum mechanics and thermodynamics. Of course, we don't see any direct relation as of now but it feel it should be important to determine the physical basis of software. The basis of software cannot be just math. It has to be physics.
> Computer science is neither about computers nor is it a science.
https://youtu.be/-J_xL4IGhJA
Also person month is a very solid limitation.
> > An engineer's model must be tightly bound to the laws of physics and chemistry.
> Anything that exists in reality and is observable by definition is tightly bound by the laws of physics and chemistry. Software is too.
No. Software is only loosely bound by physics and chemistry. Sure, the bounds exist - they're real - but most software, most of the time, does not bump into them much at all.
But
> > An engineer's model must be tightly bound to the laws of physics and chemistry.
is also wrong. This is using a pre-software definition of engineering to try to define software engineering. It would be like trying to use a pre-Faraday definition of physics to define microwave engineering.
If only there were "real" engineers who could answer this question... https://www.hillelwayne.com/tags/crossover-project/
> 429 Too Many Requests
This is definably not engineering.
The link is from Internet Archive. The original post was on geocities which has long been dead.