That's funny. I clicked on the HN article on the home page about the AT Protocol[1] expecting an article on the Hayse set. And then I scrolled down and saw this article.
as do virtually all LTE-M (etc) cellular modules. I still have to maintain several model and even firmware specific AT command lists for several modules to work correctly :( (shakes fist at sierra wireless)
> M0 or M Speaker Mute, completely silent during dialing M3 is also common, but different on many brands
As a teenager with my first modem (I think I started with a 14.4, so not that early) I had no idea how to mute the modem with those commands yet while connecting to BBSes.
So I created my own "mute" (for during connection negociation at the beginning of a call, the modems were extremely noisy) system...
Late at night, when my parents were asleep, I'd unscrew the cover of the modem, take the PCB out and muffle it between two pillows while the connection was establishing.
Worked flawlessly.
As I was both up to no good and because I didn't want risking shorting the PCB, I'd then put the cover back on. Rinse and repeat every night.
That's funny. I clicked on the HN article on the home page about the AT Protocol[1] expecting an article on the Hayse set. And then I scrolled down and saw this article.
[1] https://news.ycombinator.com/item?id=49527123
My first job in IT was at AOL tech support and we could rattle off modem strings from memory :-)
Still useful to know if you have a cellular hotspot. GSM uses AT commands for lots of things.
as do virtually all LTE-M (etc) cellular modules. I still have to maintain several model and even firmware specific AT command lists for several modules to work correctly :( (shakes fist at sierra wireless)
> M0 or M Speaker Mute, completely silent during dialing M3 is also common, but different on many brands
As a teenager with my first modem (I think I started with a 14.4, so not that early) I had no idea how to mute the modem with those commands yet while connecting to BBSes.
So I created my own "mute" (for during connection negociation at the beginning of a call, the modems were extremely noisy) system...
Late at night, when my parents were asleep, I'd unscrew the cover of the modem, take the PCB out and muffle it between two pillows while the connection was establishing.
Worked flawlessly.
As I was both up to no good and because I didn't want risking shorting the PCB, I'd then put the cover back on. Rinse and repeat every night.
I put a blob of putty in the speaker hole on my first 'hard' modem for this exact reason