since GLM 5.2 (perhaps even earlier?) it has been remarkably easy to reverse engineer any closed protocol you want as long as you have a binary. previously, it required so much manual effort as to simply not be worth it 95% of the time.
now all you need is IDA or Ghidra MCP, a binary and some vague sloppy instructions.
some more recent models even started instrumenting a running binary (when possible) to enumerate the protocol without being explicitly instructed to, which is even better.
Author here. tapo is an unofficial Rust client library for TP-Link Tapo devices (plugs, lights, hubs, cameras), with a Python wrapper built on the same crate. It is not affiliated with TP-Link.
The short version: since late 2025, firmware updates have made Tapo devices refuse third-party clients unless you turn on a "Third-Party Compatibility" switch in the Tapo app. The switch works by bringing back the older login, KLAP. With it off, devices speak an undocumented protocol called TPAP, which logs in with SPAKE2+ (RFC 9383). The library now speaks TPAP, so the switch can stay off.
The part I found most interesting is the security difference. A recorded KLAP login can be used to test password guesses offline. With SPAKE2+ it can't, and learning the password later doesn't decrypt sessions captured earlier. So the "compatibility" switch is really a security downgrade, and TP-Link's own FAQ says enabling it "may reduce the security of your devices".
Not everything works with the switch off yet: some cameras, such as a C210 on firmware 1.5.2, still need it on.
Happy to answer questions about the protocol work or the library.
since GLM 5.2 (perhaps even earlier?) it has been remarkably easy to reverse engineer any closed protocol you want as long as you have a binary. previously, it required so much manual effort as to simply not be worth it 95% of the time.
now all you need is IDA or Ghidra MCP, a binary and some vague sloppy instructions.
some more recent models even started instrumenting a running binary (when possible) to enumerate the protocol without being explicitly instructed to, which is even better.
I was always taught: Read good books, that's how you'll write.
I don't even really care AI or human if its written like this. I would rather do anything else than continue reading.
Hard to disagree. I'm interested, but... the writing sucks.
And there's no excuse now anyway the latest Opus/Astra models are actually tolerable. Use those if you must.
Author here. tapo is an unofficial Rust client library for TP-Link Tapo devices (plugs, lights, hubs, cameras), with a Python wrapper built on the same crate. It is not affiliated with TP-Link.
The short version: since late 2025, firmware updates have made Tapo devices refuse third-party clients unless you turn on a "Third-Party Compatibility" switch in the Tapo app. The switch works by bringing back the older login, KLAP. With it off, devices speak an undocumented protocol called TPAP, which logs in with SPAKE2+ (RFC 9383). The library now speaks TPAP, so the switch can stay off.
The part I found most interesting is the security difference. A recorded KLAP login can be used to test password guesses offline. With SPAKE2+ it can't, and learning the password later doesn't decrypt sessions captured earlier. So the "compatibility" switch is really a security downgrade, and TP-Link's own FAQ says enabling it "may reduce the security of your devices".
Not everything works with the switch off yet: some cameras, such as a C210 on firmware 1.5.2, still need it on.
Happy to answer questions about the protocol work or the library.